ipLDK-60 - PBX that supports ISDN/PRI
ipLDK-60 - digital PBX optimized for small and medium businesses.
Catalogue | Ready configurations | Documentation and software
PBX ipLDK-S0 offers a wide range of communication services required by today: support VoIP, ISDN PRI, the function of Caller ID (CID) and the Russian ADN, Short Message Service (SMS). Integrated voice mail service and auto attendant are used to greet customers and create personal voice mailboxes. PBX also offers for users additional features such as TARI interface for integration of PC phone and PC-Attendant applications; Remote system access for configuration of the station; tone recognition in analog trunks, SMDR and provide the information of traffic analysis.
Advantages:
• Scalability - from 3 FXO (CO lines)/08 FXS (internal lines) up to 36/48 (internal).
• Universality – connection of analog and digital phones to hybrid port in any ratio.
• Additional functions –transfer of number of calling subscriber (CLI) to the analog phone, SMS, caller ID device and CLI to internal lines, automatic operator (AAFB), voice mail (VMIB), management of call duration, an internal source of music on hold.
• Easy installation - intuitive application PC Admin with help files in Russian (help), remote administration via connection to LAN or through PSTN modem.
• Digital terminal LDP 7000 series are used in ipLDK-100/300/600.
• Applications - client application of subscriber of system (ezPhone) and client application of provider of system (ezAttendant) for MS Windows.
• The ability to integrate into the corporate network PBX.
• QSIG connection using ISDN PRI and VoIP.
Specifications
Item | Description | Specification |
CPU | CPU | ARM7 TDMI core (32bit, 50MHz) |
Switching Device | Custom Mixed-Signal ASIC Device | |
Memory Back-up Duration | 7 years | |
PSU | AC Voltage Input | 100~240 +/- 10% Volt AC @47-63Hz |
AC Power consumption | 90W | |
AC Input Fuse | 2A @250Volt AC | |
DC Output Voltage | +5, -5, +27, +30Volt DC | |
External Backup Battery | Input Voltage | +24 Volt DC(+12VDC x 2ea) |
Battery Fuse | 5.0A @250Volt AC | |
Charging Current | Max. 200mA | |
Battery Load Current | Max. 3A (only BKSU), Max. 6A (BKSU + EKSU) | |
Ring Signal | 75Vrms, 25Hz | |
External Relay Contact | 1A @30Volt DC | |
Music Source Input | 0dBm @600ohm | |
External Paging Port | 0dBm @600ohm | |
Ring Detect Sensitivity | 30Vrms @16-55Hz | |
DTMF Dialing | Frequency Deviation | Less than +/-1.8% |
Signal Rise Time | 5ms | |
Tone Duration, on time | Min. 50 ms, Normally 100ms | |
Inter-digit Time | Min. 30ms, Normally 100ms | |
Pulse Dialing | Pulse Rate | 10PPS |
Break/Make Ratio | 60/40% or 66/33% | |
Operating Environment | Temperature | 0 (oC) – 40 (oC) |
Humidity | 0 - 80% (non-condensing) | |
Dimension | KSU(NTB411) | 339mm(W) x 288mm(H) x 85mm(D) |
Expansion KSU(NTB412) | 339mm(W) x 288mm(H) x 85mm(D) | |
Weight | KSU(NTB411) | 1.8Kg |
Expansion KSU(NTB412) | 1.8Kg | |
MODU(NTB413) ) | Analog Modem | Bell, ITU-T, V.34 V.32BIS, V.90 |
Speed | 300bps up to 33Kbps speed rate | |
Connection | Automatic rate negotiation | |
VOIB(NTB422) | LAN Interface | 10 Base-T Ethernet (IEEE 802.3) |
Speed | 10 Mbps (Auto-Negotiation) | |
Duplex | Half Duplex or Full Duplex (Auto-Negotiation) | |
VOIP Protocol | H.323 Revision 2 | |
Voice Compression | G.711/G.726/G729/G.723.1 | |
Voice/Fax Switching | T.38 | |
Echo cancellation | G.165 |