x220 Series
Managed Gigabit Layer 3 Switches
the Allied Telesis x220 Series are fully managed high-performing Gigabit Layer 3 switches. Integrated security features, and 28 SFP or 48 Gigabit copper ports, enable long-distance fiber, or high-density copper connectivity at the edge of the network.
- Reduce costs and automate network and device management with the Autonomous Management Framework™ (AMF)
- Expand network reach while keeping simple operation in distributed environments with long-distance fiber connectivity
- Prevent eavesdropping of sensitive data on fiber links with Active Fiber Monitoring
- Support resilient high-speed ring-based networks with Ethernet Protection Switched Ring (EPSRing™)
- Connect and power security cameras, wireless access points, and other devices with Power over Ethernet (PoE+)
Key Features
- AlliedWare Plus™ Enterprise-class operating system
- Static and dynamic (RIP) routing for L3 environments
- Fiber and Copper port models enable flexible deployment
- sFlow enables network performance monitoring and optimization
- ACLs manage access and traffic control across the network
- Continuous PoE maximizes endpoint connectivity
More information (pdf)| Switches Brackets for mounting in a 19-inch rack included | |
|---|---|
| AT-x220-28GS-xx | 28-port 100/1000X SFP switch |
| AT-x220-52GP-xx | 48-port 10/100/1000T-POE + switch with 4 SFP cascade ports and one fixed power supply |
| AT-x220-52GT-xx | 48-port 10/100/1000T switch with 4 SFP cascading ports and one fixed power supply |
Where xx =
10 for US power cord
20 without power cord
30 for UK power cord
40 for Australian power cord
50 for European power cord
| NAME | DESCRIPTION | INCLUDES |
|---|---|---|
| AT-FL-x220-8032 | ITU-T G.8032 License | G.8032 Ethernet CFM ring protection |
| AT-FL-x220-CPOE | Permanent PoE License | Constant PoE power supply for the XSPQm model |
- Up to 16K MAC addresses
- Routes: 16 (IPv4), 16 (IPv6)
- Up to 2K multicast records
- 512 MB DDR SDRAM
- 128 MB of flash memory
- 4094 configurable VLANs
- Packet buffer memory: 1.5 MB (28 GB), 3 MB (52 GB)
- Supports 10 KB jumbo frames
- High-speed wire forwarding
| GOODS | COPPER PORTS 10/100/1000 T | SFP 100/1000x PORTS | TOTAL PORTS | POE + ALLOWED PORTS | Switching FABRIC | Shipping rate |
|---|---|---|---|---|---|---|
| x220-28GS | - | 28 | 28 | - | 56 Gbps | 41.7 million packets per second |
| x220-52GP | 48 | 4 | 52 | 48 | 104 Gbps | 77.4 million packets per second |
| x220-52GT | 48 | 4 | 52 | - | 104 Gbps | 77.4 million packets per second |
Physical characteristics
| GOODS | WIDth X DEPth X HEIGHT | INSTALLATION | WEIGHT WIthOUT PACKAGING | WEIGHT IN thE PACKAGE | Packed dimensions |
|---|---|---|---|---|---|
| x220-28GS | 441 x 323 x 44 mm (17.36 x 12.72 x 1.73 inches) |
Installation in a rack 1RU | 4.3 kg (9.47 lbs) | 6.1 kg (13.45 lbs) | 575 x 445 x 150 mm (22.64 x 17.52 x 5.90 inches) |
| x220-52GP | 441 x 359 x 44 mm (17.36 x 14.13 x 1.73 inches) |
Installation in a rack 1RU | 5.8 kg (12.79 lbs) | 7.8 kg (17.20 lbs) | 575 x 520 x 150 mm (22.64 x 20.47 x 5.90 inches) |
| x220-52GT | 441 x 323 x 44 mm (17.36 x 12.72 x 1.73 inches) |
Installation in a rack 1RU | 4.5 kg (9.92 lbs) | 6.4 kg (14.12 lbs) | 575 x 445 x 150 mm (22.64 x 17.52 x 5.90 inches) |
Power and noise characteristics
| NO LOAD POE | FULL LOAD POE + (PWR800) | POE SOURCES | |||||||
|---|---|---|---|---|---|---|---|---|---|
| GOODS | MAXIMUM POWER CONSUMPTION | MAXIMUM HEAT DIStrIBUTION | NOISE | MAXIMUM POWER CONSUMPTION | MAXIMUM HEAT DIStrIBUTION | NOISE | MAX POWER BUDGET. | MAX. POE (15 W) | MAX. POE (30 W) |
| x220-28GS | 52 W | 179 BTE/h | 39 dB | - | - | - | - | - | - |
| x220-52GP | 48 W | 164 BTE/h | 42 dB | 909 W | 577 BTE/h | 42 dB | 740 W | 48 | 24 |
| x220-52GT | 47 W | 160 BTU/h | 39 dB | - | - | - | - | - | - |
Delay (microseconds)
| PORT SPEED | |||
|---|---|---|---|
| GOODS | 10 Mbps | 100 Mbps | 1GB/s |
| x220-28GS | 39.6 μs | 6.8 μs | 3.8 μs |
| x220-52GP | 35.1 μs | 5.5 μs | 2.6 μs |
| x220-52GT | 35.1 μs | 5.5 μs | 2.6 μs |
| SFP modules | |
|---|---|
| AT-SPFX/2 | 100FX multimode fiber 1310 nm up to 2 km |
| AT-SPFX/15 | Single-mode fiber 100FX 1310 nm to 15 km |
| AT-SPFXBD-LC-13 | 100BX Bi-Di (1310 nm Tx, 1550 nm Rx) fiber up to 10 km |
| AT-SPFXBD-LC-15 | 100BX Bi-Di (1550 nm Tx, 1310 nm Rx) optovolokno do 10 km |
| AT-SPTX | 1000T 100 m copper |
| AT-SPSX (1) | Multimode fiber 1000SX GbE with a wavelength of 850 nm to 550 m |
| AT-SPSX/I | Multimode 1000SX GbE fiber with a wavelength of 850 nm to industrial temperatures up to 550 m |
| AT-SPEX | Multimode fiber 1000X GbE with a wavelength of 1310 nm to 2 km |
| AT-SPLX10 | Single-mode fiber 1000LX GbE 1310 nm up to 10 km |
| AT-SPLXI0/I | Single-mode fiber 1000LX GbE with a wavelength of 1310 nm, industrial temperature up to 10 km |
| AT-SPBDI0-13 | Optovolokno 1000LX GbE Bi-Di (1310 nm Tx, 1490 nm Rx) do 10 km |
| AT-SPBDI0-14 | Optovolokno 1000LX GbE Bi-Di (1490-nm Tx, 1310 nm Rx) do 10 km |
| AT-SPLX40 | Single-mode fiber 1000LX GbE 1310 nm up to 40 km |
| AT-SPZX80 | Single-mode fiber 1000ZX GbE 1550 nm at a distance of up to 80 km |
| AT-SPBD20-13/I (2) | Fiber 1000BX GbE Bi-Di (1310 nm Tx, 1490 nm Rx) up to 20 km |
| AT-SPBD20-14/I (2) | Optovolokno 1000BX GbE Bi-Di (1490-nm Tx, 1310 nm Rx ) up to 20 km |
| AT-SPBD40-13/I | Single-mode Bi-Di fiber 1000LX GbE (1310 nm Tx, 1490 nm Rx) at a distance of up to 40 km, industrial temperatures |
| AT-SPBD40-14/I | Single-mode Bi-Di fiber 1000LX GbE (1490-nm Tx, 1310 nm Rx) up to 40 km, industrial temperatures |
(1) the three-speed AT-SPSX only supports gigabit connection in x220-28GS.
(2) Only supported in x220-28GS